The XADO Atomic Oil 0W-20 SP Red Boost is a premium motor oil specifically developed for American and Japanese passenger cars, SUVs, and light trucks with gasoline engines requiring API SP and ILSAC GF-6 certified oils.
It can be used for lubricating high-specific performance engines and ensuring reliable protection, including multi-valve, turbocharged, intercooled, direct injection, catalytic converter-equipped engines, allowing for longer oil change intervals.
It is suitable for hybrid cars with gasoline engines manufactured from 2016 onwards. Recommended for vehicles of various brands, including Toyota, Honda, and Lexus models. It can be used for engines running on gas (LPG and CNG) and biofuels with up to 85% ethanol content (E85).
The optimal oil viscosity contributes to fuel efficiency and guarantees easy engine starting even at low temperatures.
The oil meets API SP specifications, minimizes the risk of low-speed pre-ignition (LSPI), and reliably protects the timing chain from elongation and wear.
The XADO Atomic Oil 0W-20 SP Red Boost oil has high thermal stability and provides reliable lubrication for components under difficult operating conditions, high temperatures, and loads. It protects against wear, corrosion, sludge formation, and deposits, ensuring maximum performance and durability.
Thanks to the innovative RED BOOST additive, it stabilizes the TBN (Total Base Number) value of the oil under high thermal load.
With the presence of REVITALIZANT®, the oil compensates for continuous wear of engine units and components, keeping the engine's operating parameters (compression, performance, and efficiency) at the highest level.
- The RF (REVITALIZATION® Factor) indicates the effectiveness of engine restoration and wear protection.
RF=10.5 means that the engine is reliably protected against continuous wear.
The XADO Atomic Oil 0W-20 SP Red Boost meets the following requirements:
- SAE 0W-20
- Chrysler MS 6395
- API SP/SP RC/SN Plus
- GM Dexos 1 Gen 2
- ILSAC GF-5, ILSAC GF-6A
- Ford WSS-M2C-947A
Physical-chemical data (typical values):
- Density at 20°C, kg/l: 0.841
- Kinematic viscosity at 100°C, mm²/s: 8.5
- Kinematic viscosity at 40°C, mm²/s: 44.2
- Dynamic viscosity, cP: 3,244
- Viscosity index: 173
- Flash point, °C: >200
- Pour point, °C: ≤-42
Application:
It can be used in engines where the use of API SP (SL, SM, SN) or ILSAC GF-5 (GF-2, -3, -4) oils is recommended.
XADO is not responsible for damage resulting from the improper use of the product.
