MorE4x4  Box type roof rack for Nissan Navara D40 Double cab 2005-2014

Dimension: 120 cm x 140 cm

Its structure consists of two spatial crossbars made of 2mm steel, steel mounting lugs, 6mm thick aluminum side elements of the trunk and a set of stainless screws for self-assembly.

The trunk is not mounted on the factory railings as they are too weak in this Nissan model. The rack is installed by installing 8 rivet nuts mounted inside the vehicle's roof gutters (included). This is undoubtedly the strongest place on the roof of Nissan, and it gives the More 4x4 box a solid mounting base.

The luggage rack's crossbeams are equipped with holes for mounting, for example a roof tent.

At the front of the roof rack, there is a place for mounting the vehicle's front lighting in the form of far-reaching halogens or a LED panel with a maximum width of 110 cm. There are also mounting places for four work lamps mounted inside the rear and side parts of the luggage compartment. This solution protects the lamps and their installation against mechanical damage.

The trunk is covered with an epoxy primer applied with powder coating technique and structural paint in graphite color, and some elements in Inox color.

Note: To mount the rack, there has to be make holes in the roof of the vehicle (inside the roof gutters) and attach the platform mount with rivet nuts (supplied).

The price is for the ready made platform with mounting elements, but does not incluedes the lights.

MorE4x4 Box type roof rack for Toyota Hilux Revo 2015->; Rocco/Invincible 2020-> Double cab 

Dimension: 120 cm x 140 cm

Its structure consists of two spatial crossbars made of 2mm steel, steel mounting lugs, 6mm thick aluminum side elements of the trunk and a set of stainless screws for self-assembly. The rack is installed by installing 8 rivet nuts mounted inside the vehicle's roof gutters (included). 

The luggage rack's crossbeams are equipped with holes for mounting, for example a roof tent.

At the front of the roof rack, there is a place for mounting the vehicle's front lighting in the form of far-reaching halogens or a LED panel with a maximum width of 110 cm. There are also mounting places for four work lamps mounted inside the rear and side parts of the luggage compartment. This solution protects the lamps and their installation against mechanical damage.

The trunk is covered with an epoxy primer applied with powder coating technique and structural paint in graphite color, and some elements in Inox color.

Note: To mount the rack, there has to be make holes in the roof of the vehicle (inside the roof gutters) and attach the platform mount with rivet nuts (supplied).

The price is for the ready made platform with mounting elements, but does not incluedes the lights.