Alloy Car Roof Rack for Suzuki Jimny 2018-
(w/o VAT:689.1 €)
(w/o VAT:705.91 €)
The bracket allows for the installation of the roof rack on any car with a body equipped with classic roof channels.
More4x4 roof racks and mounting brackets are coated with a powder coating, electro-arc galvanizing, and then coated with a high-wear-resistant Sahara polyester layer and Spękana Pustynia structural paint.
- Height: 8 cm
-Material: 3 mm steel
The mounting is available in the following versions: - 11 cm (BA002) - 14 cm (BA017) - 16 cm (BA032) - 23 cm (BA033)
The rack mount is made of 3mm thick steel. The handle makes it possible to mount a roof rack to any car whose body structure is equipped with classic roof gutters.
The paw is completely covered with "Cracked Desert" structural paint applied in the powder coating technique.
- Height: 11 cm
- Material: 3mm steel
Application: Cars with short and long body types
Platform dimensions: 120 cm x 195 cm
The platform is a steel structure made of 2mm thick steel, powder coated in black and externally finished with a "cracked desert" structural stove paint. There are mounting holes for LED work lamps and for LED panels or other light source in the front part of the luggage compartment in the side sections and behind the side grilles.
In the price is inclueded the ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
On the upper surface the More 4x4 basket carrier has holes for easy mounting of luggage nets, and on the base beams of the trunk, holes for screwing any individual fasteners.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 115-126 cm
Application: Cars with short body types (2-3 doors)
Platform dimensions: 120 cm x 170 cm
The More 4x4 roof rack size 120x170 cm platform itself without fixing the boot. It is a steel structure, powder coated in black and finished with a structure on the outside.
On the sides of the boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.The platform is flat at the top and adapted for mounting roof tents. On the upper surface it has holes for easy mounting of luggage nets and for screwing any individual fasteners.
The price is for a ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 115-126 cm.
Application: Cars with short body types (2-3 doors)
Platform dimensions: 130 cm x 170 cm
The More 4x4 roof rack size 130x170 cm platform itself without fixing the boot. It is a steel structure, powder coated in black and finished with a structure on the outside.
On the sides of the boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.The platform is flat at the top and adapted for mounting roof tents. On the upper surface it has holes for easy mounting of luggage nets and for screwing any individual fasteners.
The price is for a ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 125-136 cm.
Application: Cars with long body type (4-5 doors)
Platform dimensions: 110 cm x 205 cm
The More 4x4 roof rack size 110x205 cm platform itself without fixing the boot. It is a steel structure, powder coated in black and finished with a structure on the outside.
On the sides of the boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.The platform is flat at the top and adapted for mounting roof tents. On the upper surface it has holes for easy mounting of luggage nets and for screwing any individual fasteners.
The price is for a ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 105-116 cm.
Application: Cars with long body type (4-5 doors)
Platform dimensions: 120 cm x 205 cm
The More 4x4 roof rack size 110x205 cm platform itself without fixing the boot. It is a steel structure, powder coated in black and finished with a structure on the outside.
On the sides of the boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.The platform is flat at the top and adapted for mounting roof tents. On the upper surface it has holes for easy mounting of luggage nets and for screwing any individual fasteners.
The price is for a ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 115-126 cm.
Application: Cars with long body type (4-5 doors)
Platform dimensions: 130 cm x 225 cm
The More 4x4 roof rack size 130x225 cm platform itself without fixing the boot. It is a steel structure, powder coated in black and finished with a structure on the outside.
On the sides of the boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.The platform is flat at the top and adapted for mounting roof tents. On the upper surface it has holes for easy mounting of luggage nets and for screwing any individual fasteners.
The price is for a ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 125-136 cm.
The rack mount is made of 3mm thick steel. The handle makes it possible to mount a roof rack to any car whose body structure is equipped with classic roof gutters.
The paw is completely covered with "Cracked Desert" structural paint applied in the powder coating technique.
- Height: 14 cm
- Material: 3mm steel
Dedicated mounting for the More 4x4 luggage rack for Suzuki Jimny 1998-2018, made of steel, thickness 3 mm.
It is completely covered with "Cracked Desert" structural paint applied in the powder coating technique.
Dedicated mounting for the More 4x4 luggage rack made of steel with a thickness of 3 mm.
It is completely covered with "Cracked Desert" structural paint applied in the powder coating technique.
Application: Pick up with double cabin
Platform dimensions: 120 cm x 130 cm
The platform is a steel structure made of 2mm thick steel, powder coated in black and externally finished with a "cracked desert" structural stove paint. There are mounting holes for LED work lamps and for LED panels or other light source in the front part of the luggage compartment in the side sections and behind the side grilles.
In the price is inclueded the ready-made platform without mounting elements, dedicated to a specific car model and without the cost of lighting.
On the upper surface the More 4x4 basket carrier has holes for easy mounting of luggage nets, and on the base beams of the trunk, holes for screwing any individual fasteners.
The platform requires the use of mounts dedicated to specific vehicles or grips with regulation for classic gutters available in our offer.
In the case of using MorE 4x4 fasteners for classic gutters, the platform can be used for a vehicle with the following gutter spacing: 115-126 cm
Laser-cut, very high quality;
Powder-coated matte black color
Very easy to install
Dimensions: 150x115 cm
Weight: 19 kg
Laser-cut, very high quality;
Powder-coated matte black color
Very easy to install
Dimensions: 161x129x14 cm
Weight: 22 kg
Material: Aluminum
The bracket allows the installation of the roof rack for any car with a body equipped with classic roof gutters.
More4x4 roof racks and components are treated with shot blasting, electro-arc galvanization, and then coated with a layer of Sahara polyester for increased wear resistance, topped with 'Spękana Pustynia' structural paint, all applied through powder coating.
- Height: 16 cm
-Material: 3 mm steel
The attachment is available in the following versions: - 8 cm (BA034) - 11 cm (BA002) - 14 cm (BA017) - 23 cm (BA033)
The bracket allows for the installation of the roof rack on any car with a body equipped with classic roof channels.
More4x4 roof racks and mounting brackets are coated with a powder coating, electro-arc galvanizing, and then coated with a high-wear-resistant Sahara polyester layer and Spękana Pustynia structural paint.
- Height: 23 cm
-Material: 3 mm steel
The mounting is available in the following versions: - 8 cm (BA034) - 11 cm (BA002) - 14 cm (BA017) - 16 cm (BA032)
Recommended for: Suzuki Jimny (2018+)
Platform dimensions: 130 cm x 170 cm
Package contents: BM014 platform with BA002 fastening
At the front of the roof rack, there is a mounting location for the vehicle's front lighting in the form of long-distance halogen lamps that can be mounted under the gear rack or LED panels of the size matching the gear rack opening, with dimensions of 540x50 mm (dedicated panels: Wesem-link, 4wd-link). The included panel hole cover allows for the use of the rack without front lighting. Within the rear and side sections of the roof rack, there are also places for securing four separate work lights (BA006). This solution protects the lights and their installation from mechanical damage.
The platform is flat on top and suitable for mounting roof tents. The upper surface of the offroad rack has holes for easy installation of luggage nets and screwing in individual fasteners.
For the installation of the platform, attachment to a classic roof rail is required.6 pieces (included in the kit
Platform dimensions: 130 cm x 170 cm
In the set: platform with mounts (6 pcs)
The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside.
On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot.
The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.