Skyjacker Nitro 8000 Lift 0" rear nitro shock absorber - Dodge Dakota 87-96

Skyjacker Nitro 8000 Lift 0" rear nitro shock absorber - Dodge Dakota 87-96

SKYN8084_UNIQUE4

Multi- stage velocity sensitive valving
Twin tube construction
Bonded iron piston
Chromed piston rod with micro pores
Red polyurethane bushings

Compatible with: Dakota 87-96

Car brand:

Dodge

Where to install:

hátul

Out of stock

184.5 €
(w/o VAT:145.27 €)

Fox Performance 2.0 IFP Lift 1,5-3,5" rear nitro shock absorber - Ford F250 99-16, F350 99-16

FOX980-24-653_UNIQUE1

2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
Clear-anodized for a durable finish
Internal IFP mono-tube reservoir design
Black-anodized, CNC-machined 6061-T6 billet aluminum
Shaft: 5/8" hard chrome plated heat-treated alloy steel
Race-developed high-flow piston design
Application specific valving to maximize performance
Redundant sealing pack system main seal, wiper seal, scraper seal
JM92 Advanced Suspension Fluid for improved performance at variable temperatures
Quiet nitrile rubber allows for increased suspension articulation

Compatible with: F250 99-16, F350 99-16

Car brand:

Ford

Where to install:

hátul

Out of stock

561.5 €
(w/o VAT:442.13 €)

TeraFlex Falcon SP2 3.1 Piggyback Petrol Lift 0-1,5" shock absorbers kit" - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.1 Piggyback Petrol Lift 0-1,5" shock absorbers kit" - Jeep Gladiator JT 20->

TX14-02-31-400-000

Vehicle-specific shock absorbers
Race-inspired performance for increased vehicle stability
Improved dynamic roll control and low-speed damping
Dramatic improvement in on-road comfort and offroad performance
Optimized fitment for unobstructed suspension travel and articulation
2.3” shock body provides optimal performance
6061-T6 aluminum alloy shock body resists Impact to protect internal components
Smooth honed internal shock body surface for long-term performance
3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
Large shaft diameter provides a wide range of adjustment on adjustable shocks
Hard anodized 6061-T6 aluminum alloy billet piston
1-piece Teflon bronze piston wear band w/ O-ring
VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
VOD reduces shock bottoming at full compression or over uneven terrain
OGS (Oil/Gas Separator) prevents cavitation
High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
Synthetic formula also contains special anti-wear and lubricity agents
1,000-hour salt spray corrosion resistance test on all hardware
Designed, engineered, and assembled in-house from domestic and globally sourced components
Patented design

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

3 138.36 €
(w/o VAT:2 471.15 €)

TeraFlex Falcon SP2 3.1 Piggyback Petrol Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.1 Piggyback Petrol Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TX14-02-31-400-150

_x000D_

Provide increased stability and better ride quality

Adapted for everyday driving and rough terrain

Engineered in the image of motorsport beasts

Add a sporty, aggressive look

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

3 138.36 €
(w/o VAT:2 471.15 €)

TeraFlex Falcon SP2 3.3 Fast Adjust Piggyback Petrol Lift 0-1,5"shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.3 Fast Adjust Piggyback Petrol Lift 0-1,5"shock absorbers kit - Jeep Gladiator JT 20->

TX14-02-33-400-000

_x000D_

Better ride quality and stability

Designed for both asphalt and off-road

Inspired by motorsport

Gives your car more agressive, sporty look

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

4 899.98 €
(w/o VAT:3 858.26 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-03-35-400-000

SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware
Built in-house at the TeraFlex Falcon Shock Division

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-03-35-400-002

_x000D_

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "select" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TX14-03-35-400-150

SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres,3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware
Built in-house at the TeraFlex Falcon Shock Division

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TX14-03-35-400-152

_x000D_

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

Work with lifts 2-4,5''

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "select" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 3,5-4,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Diesel Lift 3,5-4,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-03-35-400-202

_x000D_

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "select" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-04-35-400-000

Fast adjust knob with 3 basic positions: soft, auto, firm
SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or offroad handling, stability, and control w/ minimal head toss
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "Firm" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance
6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 0-1,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-04-35-400-002

_x000D_

Fast adjust knob with 3 basic positions: soft, auto, firm

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or offroad handling, stability, and control w/ minimal head toss

Work with lifts 2-3''

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "Firm" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance

6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 2-3" shock absorbers kit - Jeep Gladiator JT 20->

TX14-04-35-400-152

_x000D_

Fast adjust knob with 3 basic positions: soft, auto, firm

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or offroad handling, stability, and control w/ minimal head toss

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "Firm" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance

6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Built in-house at the TeraFlex Falcon Shock Division

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 3,5-4,5" shock absorbers kit - Jeep Gladiator JT 20->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Diesel Lift 3,5-4,5" shock absorbers kit - Jeep Gladiator JT 20->

TX14-04-35-400-202

_x000D_

Fast adjust knob with 3 basic positions: soft, auto, firm

SP2 mode adjust shocks add Soft and Performance modes

Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures

Performance setting recommended for maximum highway and/or offroad handling, stability, and control w/ minimal head toss

Work with lifts 2-3''

Corner-specific shock absorber with race-inspired performance

Smaller knob for 8 position additional hardness scale in the "Firm" mode

Air Adjust Switch with 2 compression settings for large damping adjustments

Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose

Increases vehicle stability

2.25” shock body provides optimal performance

6061-T6 aluminum alloy shock body providing superior heat dissipation

Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires

3/4” shaft to prevent shaft buckling

Induction hardened chrome plated shaft resists rock damage and corrosion

Oil - Gas separator prevents cavitation

1-piece Teflon piston

Red Line full synthetic shock oil with high viscosity index to work in all temperatures

Synthetic formula also contains special anti-wear and lubricity

1,000-hour salt spray corrosion resistance test on all hardware

Built in-house at the TeraFlex Falcon Shock Division

Compatible with: Gladiator JT 20-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TX10-03-35-400-000

SP2 mode adjust shocks add Soft and Performance modes
Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
Work with lifts 2-4,5''
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Wrangler JL 2 Door 18-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 2-4,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Petrol Lift 2-4,5" shock absorbers kit - Jeep Wrangler JL 18->

TX10-03-35-400-200

SP2 mode adjust shocks add Soft and Performance modes
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres, 3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Wrangler JL 2 Door 18-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Petrol Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TX10-04-35-400-000

Fast adjust knob with 3 basic positions: soft, select, firm
SP2 mode adjust shocks add Soft and Performance modes
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres, 3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Wrangler JL 2 Door 18-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TX11-03-35-400-000

SP2 mode adjust shocks add Soft and Performance modes'
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres,3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware
Built in-house at the TeraFlex Falcon Shock Division

Compatible with: Wrangler JL 4 Door 18-present, Wrangler JL 4XE 21-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

5 766.93 €
(w/o VAT:4 540.89 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Lift 0-1,5" shock absorbers kit - Jeep Wrangler JL 18->

TX11-04-35-400-002

Fast adjust knob with 3 basic positions: soft, select, firm
SP2 mode adjust shocks add Soft and Performance modes
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "select" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres, 3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Wrangler JL 4 Door 18-present, Wrangler JL 4XE 21-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Lift 2-4,5" shock absorbers kit - Jeep Wrangler JL 18->

TeraFlex Falcon SP2 3.5 aDapt e-Adjust Piggyback Lift 2-4,5" shock absorbers kit - Jeep Wrangler JL 18->

TX11-04-35-400-202

Fast adjust knob with 3 basic positions: Soft, Firm, Auto
SP2 mode adjust shocks add Soft and Performance modes
Corner-specific shock absorber with race-inspired performance
Smaller knob for 8 position additional hardness scale in the "Firm" mode
Air Adjust Switch with 2 compression settings for large damping adjustments
Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
Increases vehicle stability
2.25” shock body provides optimal performance
6061-T6 aluminum alloy shock body providing superior heat dissipation
Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres
3/4” shaft to prevent shaft buckling
Induction hardened chrome plated shaft resists rock damage and corrosion
Oil - Gas separator prevents cavitation
1-piece Teflon piston
Red Line full synthetic shock oil with high viscosity index to work in all temperatures
Synthetic formula also contains special anti-wear and lubricity
1,000-hour salt spray corrosion resistance test on all hardware

Compatible with: Wrangler JL 4 Door 18-present, Wrangler JL 4XE 21-present

Car brand:

Jeep

Where to install:

elöl, hátul

Out of stock

6 629.61 €
(w/o VAT:5 220.17 €)