MORE4x4 Rock sliders for Toyota Land Cruiser J200
Not recommended for the KDSS version!
Rock sliders length: 180 cm
Material: steel
Material thickness: 3 mm / 6 mm
Offroad rosk sliders are made of a 3 mm wall profile and their supports are made of 6 mm thick steel. Profiles should be welded to the frame in order to obtain the gretaest possible rigidity.
The sidesteps are covered with "Cracked desert" structural paint applied with power coating technique.
The most important function of the sills is to protect the vehicle during off-road use, while still allowing the comfortable boarding in to the car. The rock sliders must be strong and durable. If they collide with an obstacle, they should effectively protect, and when properly mounted, they should allow you to lift the car.
It is very important to protect the side line of the car, so these thresholds should be welded to the chassis of the vehicle. Only in this way is it possible to maintain the structural rigidity and to provide the possibility of lifting with the Hi-lift. The use of assembly bolts instead of welding the sills to the frame may not provide sufficient strength and rigidity of the structure.
The thresholds have two openings for lifting the vehicle with a Hi-Lift. The middle hole is intended for lighting.
