F4x4 shakle holder for the bumper
(w/o VAT:35.73 €)
MorE4x4 Gondola Spare wheel carrier for Pick-Ups
MorE4x4 Gondola Spare wheel carrier for Pick-Ups
Fastening the wheel, canisters and hi-lift for the MorE 4x4 rear bumpers
The mounting is made of steel from 2 to 6 mm, powder coated and finished with structural paint.
The carrier comes standard with adjustable spare wheel mounting, hi-lift mounting, additional accessory mounting system and folding table on pneumatic cylinders. The wheel and canister holder has a locking system based on a hood lock, and thanks to a special conical hinge, it maintains the rigidity of the structure while driving, as well as when opening the gondola.
The set does not include additional elements (e.g. canisters, jerrycan carrier, hi-lift jack or other accessories) that may be visible in the photos.
(w/o VAT:1 060.85 €)
MorE4x4 Gondola canister holder for 1 canister
More4x4 Gondola canister holder for 1 canister
The MorE 4x4 canister holder allows you to mount one canister on any flat space, minimum on the MorE4x4 rear bumper nacelle.
The handle has a padlock protection. It is made of steel, painted in two layers with black powder paints.
(w/o VAT:89.22 €)
More4x4 Nato 20l canister holder (2 canisters) for Gondola carrier
A steel holder for two 20L Nato canisters, designed for mounting on the Gondola of the MorE4x4 rear bumper or for mounting on any flat surface.
It is made of 3 mm thick steel, finished with two layers of powder varnish. Thanks to the hood lock, it is possible to tighten the canisters in the holder, and the place for a padlock allows you to secure the canisters against theft.
(w/o VAT:263.75 €)
RIVAL4x4 aluminum rear bumper Ford Ranger 2012->
without LED light
(w/o VAT:2 112.6 €)
(w/o VAT:2 231.48 €)
(w/o VAT:2 231.48 €)
RIVAL4x4 aluminum rear bumper Isuzu D-Max 2012->
without LED light
(w/o VAT:2 112.6 €)
without LED light
Stubby version
(w/o VAT:1 558.46 €)
without LED light
long version
(w/o VAT:1 700.3 €)
without LED light
(w/o VAT:2 112.6 €)
(w/o VAT:2 231.48 €)
without LED light
(w/o VAT:2 112.6 €)
MorE4x4 Steel rear bumper Nissan Navara D23, NP300 after 2014, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:939.36 €)
(w/o VAT:2 231.48 €)
MorE4x4 Rear steel bumper for Nissan Navara D40 (2005-2014)
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:939.36 €)
(w/o VAT:621.7 €)
RIVAL4x4 aluminum rear bumper Toyota Hilux
(w/o VAT:2 112.6 €)
with OSRAM LED reversing light
(w/o VAT:2 231.48 €)
MorE4x4 Steel rear bumper Toyota Hilux Vigo 2005-2015, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in fixtures for work lamps and reinforced fixings for shackle handles.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:939.36 €)