Effects
Restores worn parts’ surfaces and compensates current wear
Levels and increases compression in cylinders
Reduces fuel consumption
Enhances engine service life
Increases pressure in oil system up to the nominal level
Creates active protection system against overloading and overheating
Reduces noise and vibration
Improves oil lubricating properties and tribological characteristics of engine parts
Increases engine power and acceleration capability
One treatment lasts for 60,000 miles
Application
The temperature of the compound before application should not be lower than +77 oF. Shake the bottle. Apply the compound into the oil filler neck of the engine, warmed up to the operating temperature. Start the engine and provide its idle operation for 3-5 minutes.
1 bottle (950 ml) is enough for the engine with an oil capacity system with 30-45 qt volume. Oil level should not exceed the maximal level of oil gage. Avoid overdosage.
