Effects
Rebuilds worn engine metal and reverses metal wear
Increases power and acceleration
Reduces fuel consumption
Increases engine cylinders’ compression
Decreases noise and vibrations
Restores lost oil pressure up to nominal level
Protects metal parts from overheating and overloading
Improves oil lubricating properties and tribological characteristics of engine parts
Increases engine service life
Reduce exhaust emissions toxicity (CO2, CO, HC)
One treatment lasts for 60,000 miles
Application
Make sure the automobile engine is warmed up to normal operating temperature. Turn off the vehicle. Shake the bottle for one minute and ensure it is at room temperature so that contents flow freely. Pour the contents into the engine oil reservoir. Start the car and let the engine idle for five minutes. Then drive as you normally would. It takes 600 to 900 miles to complete the Revitalization cycle, during which changing oil is NOT recommended.
Granules of Revitalizant completely dissolve in motor oil at normal operating temperature.
1 Bottle (225 ml) is enough for engine with an oil capacity of 5 qt. Larger vehicles with higher oil capacities may require more.
Note
Atomic Metal Conditioner Maximum with 1 Stage Revitalizant works in all gasoline-powered, natural-gas and diesel engines of passenger cars and trucks and 4-stroke motorcycles with oil system up to 5 Quarts
Can be combined with all types of motor oils, from full synthetic to mineral oils
It takes 600 to 900 miles to complete the Revitalization cycle, during which changing oil is NOT recommended
Repeated application of Atomic Metal Conditioner Maximum is recommended after 60,000 miles
For the highest level of protection for your vehicle’s engine use XADO Atomic Oil or Atomic Metal Conditioner HighWay during each oil change in the future. AMC Highway contains 5.5% (RF5.5) of the active ingredient necessary for 1 complete revitalization cycle
