Highly efficient product for cleaning of carburetors, injector screens, exhaust gas recirculation (EGR) valves and for anticarbon treatment of stuck piston rings. Indispensable product for removing scale and lacquer films from injector nozzles, valves, combustion chamber, undertray and piston ring grooves of the disassembled engine.
Advantages
The most efficient currently available product for cleaning of hard-to-remove contaminations.
Easily removes carbon and high-temperature lacquer films.
Quickly (within 3 minutes!) softens and dissolves all types of deposits in mechanisms and engine systems.
Application instructions
To clean a carburetor
Remove the air filter. Start the engine. Spray a plenty of the product onto all visible carburetor parts. While cleaning, maintain high rpm of the engine with the help of a throttle lever.
To clean an injector throttle valve
Spray a plenty of the product onto the throttle gate (into the air intake manifold) of the warmed up and turned off engine. Let the engine operate at increased rpm for 3–5 min.
To clean an exhaust gas recirculation valve
Dismantle the valve. Spray a plenty of the product onto contaminated valve surfaces. Wipe them dry in 3 minutes. Repeat the procedure if necessary.
To clean parts
Spray a plenty of the product onto contaminated surfaces. Wipe dry in 3 minutes. Repeat the procedure if necessary.
Anticarbon treatment of rings
1. Warm up the engine. The engine should be warm but not hot.
2. Unscrew plugs (injectors). Disconnect the connector of the ignition timing sensor, Hall sensor or commu-tator.
3. Spray the product (during up to 5 seconds) into each cylinder through a hose nozzle. Screw in the plugs. Wait 10–20 min. Unscrew the plugs. Cover the spark-plug holes with absorbing cloth so that dirt does not get onto the painted surfaces. Rotate the engine with the help of the starter for several seconds.
4. Place back the plugs (injectors).
5. Start the engine and let it run at increased rpm of the crankshaft up to 15 minutes. Within this time the softened carbon residues will be removed through the exhaust system.
