During treatment of hydraulic system assemblies it forms a protective ceramic-metal coating on parts surfaces of pumping units, servomechanisms and distributors (slide valves). It results in restoration of performance parameters of hydraulic equipment.
Advantages:
Eliminates pump howling caused by wear.
Reduces the steering effort.
Increases operation accuracy of the power steering within just 50–100 km (30–60 miles) after the application.
Reduces noise and vibrations of the hydraulic pump.
Protects parts from wear in case of a low oil level.
Application instructions:
1. Dissolve the necessary amount of the product in 30-50 ml of the used hydraulic fluid warmed up to the tempera-ture not lower than +35 °С.
2. Introduce the mixture into the fluid in the reservoir of power steering booster warmed up to the operating tem-perature.
3. 2–3 minutes after introducing the mixture turn the steer-ing wheel for 5 minutes by operating engine.
4. Operate your car in regular mode.
Dosage:
Hydraulic system capacity, L: 1-2, 2-5, 5-8
Quantity of tubes (syringes), pcs.: 1, 2, 3
