Rust preventive product designed to treat fender wells before assembling plastic protection.
Used for overall and local protection of a car body and strengthens existing coating.
Advantages
Highly resistant to chemical activity (weak acids, alkali, etc.).
Protects a car body from stone hitting, decreases noise and vibration.
Forms a thick volumetric coating possessing thixotropic properties.
Keeps high form stability (does not trickle down).
Resistant to the temperature up to 85 °С.
Applications
1. Remove dirt, rust, and dust from the surfaces to be treated.
2. Shake the can.
3. Spray onto the surface at a distance of 20-30 cm.
4. Apply 2-3 layers on the surfaces to be coated. Each next layer should be applied after short-term waiting.
5. Wait 1-2 hours. Run your car or assemble plastic wings.
Notes
The ambient air temperature while treating should be 15...20°C.
Excess of Plasticor can be easily removed with VERYLUBE TAR STAIN REMOVER.
